bobospidertg
Posts: 14
Joined: Thu Dec 29, 2011 6:26 am

60fps problem

Tue Nov 11, 2014 7:22 am

Everytime I record 60fps using bandicam i dont get 60fps, i get like 47fps , 51fps or even worse 30 and 11. any ideea why and how to repair this?

Dfactor
Posts: 215
Joined: Wed Sep 18, 2013 7:14 am

Re: 60fps problem

Tue Nov 11, 2014 7:57 am

What are your current specs?

bobospidertg
Posts: 14
Joined: Thu Dec 29, 2011 6:26 am

Re: 60fps problem

Tue Nov 11, 2014 2:06 pm

CPU Specs:
-Intel I5 3550 3.3GHz-3.7GHz Quadcore
-8Gb RAM 1600MHz Patriot Intel Extreme Masters Limited Edition
-Hard-disk 500gb and SSHD 1TB
-nVidia GTX 770 Gigabyte 4Gb GDDR5 OC
-Gigabyte H77-DS3H

User avatar
Bandicam Company
Site Admin
Posts: 6736
Joined: Mon Dec 20, 2010 12:19 pm

Re: 60fps problem

Tue Nov 11, 2014 2:48 pm

Hello bobospidertg!

Even though you have a good graphics card, you can't always get 60 FPS.

Please reduce the video resolution of your recording target, it might be the best solution for this issue.

Dfactor
Posts: 215
Joined: Wed Sep 18, 2013 7:14 am

Re: 60fps problem

Tue Nov 11, 2014 11:13 pm

What's the recording target (game)?

bobospidertg
Posts: 14
Joined: Thu Dec 29, 2011 6:26 am

Re: 60fps problem

Wed Nov 12, 2014 2:52 am

Im recording CoD AW , but when im using shadow play i get the video output to 59fps wich is good

bobospidertg
Posts: 14
Joined: Thu Dec 29, 2011 6:26 am

Re: 60fps problem

Wed Nov 12, 2014 4:37 am

I did a couple of testes and here is what i found out.
Output to MP4 doesn`t give you video file at 60fps
Output to AVI give you video fil at 60fps regardless to you in-game frames but my video editing program creates audio video de-sync if I render using AVi files

Dfactor
Posts: 215
Joined: Wed Sep 18, 2013 7:14 am

Re: 60fps problem

Wed Nov 12, 2014 9:50 am

But are you able to maintain high framerate during capture to .avi? Or does it drop?
Also, there might be a solution to prepare the .avi raws for your editing software.

bobospidertg
Posts: 14
Joined: Thu Dec 29, 2011 6:26 am

Re: 60fps problem

Thu Nov 13, 2014 6:39 am

Yes I`ved recorded the same section of the game with the same drops. But dunno why is hard to render .avi

bobospidertg
Posts: 14
Joined: Thu Dec 29, 2011 6:26 am

Re: 60fps problem

Thu Nov 13, 2014 7:02 am

But are you able to maintain high framerate during capture to .avi? Or does it drop?
Also, there might be a solution to prepare the .avi raws for your editing software.

How to prepare the raws?

Dfactor
Posts: 215
Joined: Wed Sep 18, 2013 7:14 am

Re: 60fps problem

Fri Nov 14, 2014 2:57 am

You can try using VirtualDub to quickly convert to a software encoded h.264 .avi. Should be compatible for editing software.
Or you can visit this thread and check other converters people use so you can make .mp4 or other things. viewtopic.php?f=10&t=1345

GameTipsAndMore Blog
Posts: 447
Joined: Thu May 17, 2012 12:39 am
Location: Canada
Contact: Website

Re: 60fps problem

Fri Nov 14, 2014 11:44 pm

I did a couple of testes and here is what i found out.
Output to MP4 doesn`t give you video file at 60fps
Output to AVI give you video fil at 60fps regardless to you in-game frames but my video editing program creates audio video de-sync if I render using AVi files
If I may pop in with a couple of ideas, when audio/video de-synchronization occurs, try using PCM ("Uncompressed") Audio with the AVI container. It is very lightly compressed, but for the most part it is considered 'uncompressed' and is the most compatible format for all audio editors and video editing programs. It may help alleviate the de-sync and although it is higher filesize, is faster for capturing as well (less compression/calculations going on).
Also, with the AVI wrapper, be sure to set the Keyframe Interval to "1", to ensure editing compatibility with video editing applications [you do not need this setting if you are using the MJPEG codec]. It will create larger files (recordings) as there is less room to 'analyze and compress' where the codec can, but it should also help with any desynchronization problems.

I found the new implementation of the MP4 container in Bandicam able to record up to 120fps smoothly, and I have a slightly lower performing CPU than you do:
http://cpuboss.com/cpus/Intel-Core-i5-3 ... MD-FX-6300

Are you getting over 60fps in the game, before you try to record 60fps?
If I lower the in-game resolution of Battlefield 3 (and lower some extra effects as well), I can get over 100fps and when I record in 120fps MP4 in Bandicam it comes out looking very nice and smooth then.

[The MP4 wrapper, as configured by Bandicam, seems to utilize VFR or Variable FrameRate, so if I look at the media info for the MP4 recording, it shows a "Minimum Framerate" and "Maximum Framerate", where it will lower the framerate for lower motion scenes and increase the framerate for higher motion scenes (high-action/movement); but the Maximum can indeed be over 60fps, up to the 120fps limit set within Bandicam - I will include a screenshot of the Mediainfo data from an MP4 below]
GTAMblog - Mediainfo data for MP4 wrapper_container in Bandicam 20141127.PNG
Media information data for Bandicam MP4 file type recording, showing variable frame rate, minimum and maximum recorded fps
GTAMblog - Mediainfo data for MP4 wrapper_container in Bandicam 20141127.PNG (20.56 KiB) Viewed 7705 times
Sticking with the MP4 container for a moment, you also could try setting Bandicam to record at a lower recording resolution (for example, play the game at 1080p but tell Bandicam to record at 720p) and see if that helps. Or, you could lower the in-game resolution (tell Bandicam to record Full Size, but lower the game resolution to say 1366x768, for example), which should also help to increase your in-game fps.

These are just ideas to start with - but it may help start you out finding where the problem lies, with your inability to get 60fps recordings... Good luck with it!
("Hope That Helps!") ~ Troy

Return to “Bandicam - General Discussion”

Who is online

Users browsing this forum: No registered users and 37 guests