Page 1 of 1
screen recording
Posted: Wed Jul 15, 2015 1:21 am
by keliokas
hi,why when i recording screen fps go down from 60 to 30?
OS : Windows 7 Service Pack 1 (64bit)
CPU : 3805 Mhz x8 ( GenuineIntel )
IE Version : 9.11.9600.17843
DirectX : version 9.0 or later Installed (4.09.00.0904)
VGA : NVIDIA GeForce GTX 970
Bandicam : 2, 2, 2, 790 Installed
Re: screen recording
Posted: Wed Jul 15, 2015 9:57 am
by hej
Recording and encoding the recorded video takes lots of resources. Switch mode to a hardware-accelerated encoding or drop the quality/resolution.
Re: screen recording
Posted: Wed Jul 15, 2015 4:27 pm
by keliokas
not helps at all,its same
Re: screen recording
Posted: Wed Jul 15, 2015 11:56 pm
by Matteo955
Ther is an option in bandicam under FPS tab called "Set FPS limit to". Check if is active or disabled. If is active, just disable it or set an higher limit.
Re: screen recording
Posted: Thu Jul 16, 2015 1:21 pm
by keliokas
i tried,not helps
Re: screen recording
Posted: Thu Jul 16, 2015 7:41 pm
by Bandicam Company
Hello!
What is your recording target?
What is the resolution of the video you recorded through Bandicam?
Please try some solutions below:
http://www.bandicam.com/faqs/how_to_red ... _recording
Re: screen recording
Posted: Fri Jul 17, 2015 4:29 pm
by keliokas
its screen with settings
http://prntscr.com/7toh1l
Re: screen recording
Posted: Fri Jul 17, 2015 6:09 pm
by Matteo955
120FPS?!
The tab I was referring to, was this one:
Set your FPS in your video settings (the image you posted) to 24 or 25 instead of 120, then in FPS tab (see picture above) uncheck the option "Set FPS limit" (option [5]).